1 00:00:27,180 --> 00:00:27,222 “ 2 00:00:27,223 --> 00:00:27,266 “H 3 00:00:27,267 --> 00:00:27,309 “Ha 4 00:00:27,310 --> 00:00:27,352 “Har 5 00:00:27,353 --> 00:00:27,396 “Harm 6 00:00:27,397 --> 00:00:27,439 “Harmo 7 00:00:27,440 --> 00:00:27,482 “Harmon 8 00:00:27,483 --> 00:00:27,526 “Harmoni 9 00:00:27,527 --> 00:00:27,569 “Harmonic 10 00:00:27,570 --> 00:00:27,613 “Harmonic 11 00:00:27,614 --> 00:00:27,656 “Harmonic R 12 00:00:27,657 --> 00:00:27,699 “Harmonic Re 13 00:00:27,700 --> 00:00:27,743 “Harmonic Res 14 00:00:27,744 --> 00:00:27,786 “Harmonic Rest 15 00:00:27,787 --> 00:00:27,829 “Harmonic Restr 16 00:00:27,830 --> 00:00:27,873 “Harmonic Restra 17 00:00:27,874 --> 00:00:27,916 “Harmonic Restrai 18 00:00:27,917 --> 00:00:27,959 “Harmonic Restrain 19 00:00:27,960 --> 00:00:28,003 “Harmonic Restraint 20 00:00:28,004 --> 00:00:28,046 “Harmonic Restraint 21 00:00:28,047 --> 00:00:28,089 “Harmonic Restraint V 22 00:00:28,090 --> 00:00:28,133 “Harmonic Restraint Vi 23 00:00:28,134 --> 00:00:28,176 “Harmonic Restraint Vie 24 00:00:28,177 --> 00:00:28,220 “Harmonic Restraint View 25 00:00:28,221 --> 00:00:28,263 “Harmonic Restraint View” 26 00:00:28,264 --> 00:00:28,306 “Harmonic Restraint View” 27 00:00:28,307 --> 00:00:28,350 “Harmonic Restraint View” w 28 00:00:28,351 --> 00:00:28,393 “Harmonic Restraint View” wi 29 00:00:28,394 --> 00:00:28,436 “Harmonic Restraint View” win 30 00:00:28,437 --> 00:00:28,480 “Harmonic Restraint View” wind 31 00:00:28,481 --> 00:00:28,523 “Harmonic Restraint View” windo 32 00:00:28,524 --> 00:00:28,566 “Harmonic Restraint View” window 33 00:00:28,567 --> 00:00:28,610 “Harmonic Restraint View” window: 34 00:00:28,611 --> 00:00:29,111 “Harmonic Restraint View” window: 35 00:00:29,136 --> 00:00:35,536 As mentioned before, one of the main windows of diff Harmonics room is “Harmonic Restraint View”. 36 00:00:35,561 --> 00:00:41,319 This window shows the relay harmonic characteristic curve based on the settings entered in “Test Object” window. 37 00:00:41,344 --> 00:00:47,149 The top of the characteristic curve is called “Tripping” area while the bottom is called “Not trip” areas. 38 00:00:47,174 --> 00:00:53,353 This means that if the test point is located at the top of the curve, the relay gives a trip otherwise it does not. 39 00:00:53,378 --> 00:00:56,875 This window has some shared and some unique features. 40 00:00:56,900 --> 00:01:11,574 The features available by right or left clicking on this window are common to all rooms and it is not necessary to explain them here but at the bottom of this window there is a gear by clicking on which some other useful options are displayed. 41 00:01:11,599 --> 00:01:18,477 . By clicking on “Zoom during test”, if one or multiple “Shot” or “Search” lines are drawn on the characteristic curve, 42 00:01:18,502 --> 00:01:27,092 by running the test you can see that the software zooms on the areas where the test points are located and shows the found zone line. 43 00:01:27,116 --> 00:01:33,298 If you select “Optimize All” option, by changing the “Fault type”, the characteristic curve display is “Optimized”. 44 00:01:33,323 --> 00:01:38,088 By using “Pan Mode” you can move the characteristic curve diagram as desired. 45 00:01:38,113 --> 00:01:44,792 By using “Show row number” you can view the row number of any test point or test line on the characteristic curve. 46 00:01:44,817 --> 00:01:52,672 By selecting “Show all zone”, test zones of all “Search” points are marked with a circle to find the characteristic curve line. 47 00:01:52,697 --> 00:02:00,445 By selecting “Show selected zone”, only the points of the line selected from “Search line” table are marked with a circle. 48 00:02:00,470 --> 00:02:06,165 By clicking on “Show all t act point”, the operation time of the tested points is showed. 49 00:02:06,190 --> 00:02:11,505 if the points are close to each other and it is not possible to view the times clearly, 50 00:02:11,530 --> 00:02:19,520 you can use “Show selected t act point” option which shows the time of the row selected from the test points table. 51 00:02:20,544 --> 00:02:34,935 “Show all Id & Ib Act” and “Show selected t act point” options are used to show all tested “Search Test” points and the points related to the row selected from the “Search Test” table respectively. 52 00:02:36,652 --> 00:02:44,715 By selecting “Snap to grid” option, the points on the characteristic curve that are shot close to the grids snap to the grids of this page. 53 00:02:44,740 --> 00:02:53,764 By selecting “Snap to characteristic curve” option, the points on the characteristic curve that are “Shot” close to the characteristic curve grid snap to it.