1
00:00:20,068 --> 00:00:25,247
Ability to convert Output Binary voltage to current and vice versa

2
00:00:25,894 --> 00:00:35,520
In the Sequencer room, first in the Hardware configuration window, set the  Type Setting based on the 205AMT device

3
00:00:35,553 --> 00:00:42,075
and Set the Output Voltage and Signal Output Voltage settings according to what  you see .

4
00:00:42,965 --> 00:00:52,879
Then open the View Vector window to see the values of the current  and the output and input voltages of the device in different modes, we add.

5
00:00:53,536 --> 00:01:04,661
To clarify this concept better, first connect a 100 ohm resistor to the VA 1  voltage output and in the View Table window

6
00:01:04,950 --> 00:01:21,060
Column VL1 is set to 1V and time to 0.1s and after running the test in the View  Signal and View Vector windows, you can see the injective and transitive  values.

7
00:01:21,998 --> 00:01:25,700
Now you can convert Output Voltage to Output Current

8
00:01:25,965 --> 00:01:40,958
For this, enter the  Hardware Configuration tab and changed the Type from Voltage to Current and  returning to the View Table window, you can see that the VL1 unit is changed to  A.

9
00:01:41,529 --> 00:01:52,255
By injecting 100 mA, you can see that the read voltage is 10V, and this action  determines that from the output Current Low

10
00:01:52,279 --> 00:01:57,107
High Voltage we can use two  current and voltage control modes.

11
00:01:57,451 --> 00:02:04,474
To determine more precisely the advantage of this option, first change the  resistance to 1 kilo ohm.

12
00:02:04,498 --> 00:02:14,443
By then converting Type to Voltage and injecting 1V,  you see that the current is read as 1 mA.

13
00:02:14,467 --> 00:02:24,115
By changing the Type again to Current  and injecting 100 microamps, observe the real current  injected and the read  voltage,

14
00:02:24,139 --> 00:02:33,904
we will come to the conclusion that to have low current with high  accuracy  Convert Current Low, Voltage High into a current.

15
00:02:34,474 --> 00:02:43,865
Also, in order to have low  voltage with high accuracy, it is necessary to convert Current High, Voltage Low  into a voltage

16
00:02:44,905 --> 00:02:55,427
It should be noted that in Current Low, Voltage High mode, the voltage peak is  420 V and the current peak is 1 A

17
00:02:55,716 --> 00:03:05,560
and in High Voltage, Low mode Current, the voltage peak is 22 V and the current peak is 94 A.