1 00:00:27,312 --> 00:00:27,374 S 2 00:00:27,375 --> 00:00:27,438 St 3 00:00:27,439 --> 00:00:27,501 Sta 4 00:00:27,502 --> 00:00:27,565 Star 5 00:00:27,566 --> 00:00:27,629 Start 6 00:00:27,630 --> 00:00:27,692 Start- 7 00:00:27,693 --> 00:00:27,756 Start-C 8 00:00:27,757 --> 00:00:27,819 Start-Co 9 00:00:27,820 --> 00:00:27,883 Start-Con 10 00:00:27,884 --> 00:00:27,947 Start-Cond 11 00:00:27,948 --> 00:00:28,010 Start-Condi 12 00:00:28,011 --> 00:00:28,074 Start-Condit 13 00:00:28,075 --> 00:00:28,137 Start-Conditi 14 00:00:28,138 --> 00:00:28,201 Start-Conditio 15 00:00:28,202 --> 00:00:28,265 Start-Condition 16 00:00:28,266 --> 00:00:28,328 Start-Condition- 17 00:00:28,329 --> 00:00:28,392 Start-Condition-R 18 00:00:28,393 --> 00:00:28,455 Start-Condition-Re 19 00:00:28,456 --> 00:00:28,519 Start-Condition-Rep 20 00:00:28,520 --> 00:00:28,582 Start-Condition-Repe 21 00:00:28,583 --> 00:00:28,646 Start-Condition-Repet 22 00:00:28,647 --> 00:00:28,710 Start-Condition-Repeti 23 00:00:28,711 --> 00:00:28,773 Start-Condition-Repetit 24 00:00:28,774 --> 00:00:28,837 Start-Condition-Repetiti 25 00:00:28,838 --> 00:00:28,900 Start-Condition-Repetitio 26 00:00:28,901 --> 00:00:28,964 Start-Condition-Repetition 27 00:00:28,965 --> 00:00:29,028 Start-Condition-Repetition" 28 00:00:29,029 --> 00:00:29,091 Start-Condition-Repetition" 29 00:00:29,092 --> 00:00:29,155 Start-Condition-Repetition" w 30 00:00:29,156 --> 00:00:29,218 Start-Condition-Repetition" wi 31 00:00:29,219 --> 00:00:29,282 Start-Condition-Repetition" win 32 00:00:29,283 --> 00:00:29,346 Start-Condition-Repetition" wind 33 00:00:29,347 --> 00:00:29,409 Start-Condition-Repetition" windo 34 00:00:29,410 --> 00:00:29,473 Start-Condition-Repetition" window 35 00:00:29,474 --> 00:00:29,874 Start-Condition-Repetition" window 36 00:00:30,396 --> 00:00:38,442 By clicking on the "View" menu and selecting the "Start-Condition-Repetition" option, or by clicking on its icon from the toolbar this window opens. 37 00:00:38,466 --> 00:00:42,370 In the "Start Condition" tab, the test conditions can be specified. 38 00:00:42,394 --> 00:00:49,265 If you want the test to run immediately after clicking on the "Start" icon, you have to select the "Immediately" radio button. 39 00:00:49,289 --> 00:00:52,102 After selecting this option in the statusbar, 40 00:00:52,626 --> 00:01:02,425 the St. Cond. is set on the "Immediately" and after running it the test immediately ther is no delays between clicking on "Start" and "Run". 41 00:01:02,449 --> 00:01:06,410 Please note that the software default is this option. 42 00:01:06,434 --> 00:01:13,846 If you want the test to run after receiving the contact by one of the binaries, you have to select the "On Binary Input" option. 43 00:01:14,076 --> 00:01:22,305 By selecting this option, its right side field is activated that you have to select the intended binary in it to start the test. 44 00:01:22,329 --> 00:01:26,875 In this field, the activated binaries are shown in the "Hardware Configuration". 45 00:01:26,899 --> 00:01:35,599 For example, the "C2: Start" is selected, now in the statusbar, the "St. Cond." is set on the BI.2-Start. 46 00:01:35,623 --> 00:01:43,433 After clicking on the "Start" icon, to not receiving the contact by the "C2" binary, the test has not been executed, 47 00:01:43,457 --> 00:01:47,643 now by receiving the contact by this binary, the test l runs. 48 00:01:47,667 --> 00:01:52,603 The third method to start and run a test is the use of a "GPS" antenna. 49 00:01:52,627 --> 00:01:57,466 By selecting the "On GPS", a test could be run according to the "GPS" clock. 50 00:01:57,490 --> 00:02:03,044 One of the applications of this option is in the longitudinal differential or "End to End" tests. 51 00:02:03,069 --> 00:02:15,190 To run the test using this option, the socket of the "GPS" antenna should be connected to the rear part of the "AMT105" device and the antenna is located in open space. 52 00:02:15,214 --> 00:02:22,827 By clicking on the "Start Sync" option, the "sync" process of the device with the satellite begins and in the "GPS Status: 53 00:02:22,852 --> 00:02:25,256 :" field (shown in the figure) the "GPS" status is shown. 54 00:02:25,280 --> 00:02:31,436 By "Syncing" of the device and software in the "GPS Status:" field, the "GPS is Sync" term is shown. 55 00:02:31,460 --> 00:02:36,417 In addition, in the statusbar, the St. Cond. is set on the GPS (Sync). 56 00:02:36,441 --> 00:02:45,905 Also, in thestatusbar, GPS time error is displayed in the "Time Error" section. Please note that this number should be less than 1000 ns. 57 00:02:45,929 --> 00:02:49,302 The tester time is displayed online in this toolbar. 58 00:02:49,326 --> 00:02:56,191 In the "Satellite Signal Level History" section, the number of satellites and the strength of each signal is shown. 59 00:02:56,215 --> 00:03:05,887 If the number of satellites and the signal strength is proper, the phrase "Detected" is displayed in the "Time Pulse" field and the device receives the "GPS" signals 60 00:03:05,911 --> 00:03:11,291 Then, the device should be able to synchronize its time with the received signals from the "GPS". 61 00:03:11,315 --> 00:03:21,290 The date and time of the tester are specified in the "Date and Time Tester" section that this time should be identical with the time of the "GPS" in the "Data and Time GPS" field. 62 00:03:21,314 --> 00:03:27,534 In the 32 bits windows, if the tester time is not the same as the time of your personal computer, 63 00:03:27,558 --> 00:03:34,854 you can use the Set Windows" "Time GPS(Win X86) so the time of your computer become identical with the "GPS" time. 64 00:03:35,242 --> 00:03:41,369 Using the "Next Full" and "Start Time" options, how and when the test is run are selected. 65 00:03:41,393 --> 00:03:50,846 Using the "Next Full", after selecting this option, you have to specify the time between the sequential tests for the "Shot test" from the drop down list. 66 00:03:50,871 --> 00:03:56,996 For example, if you have several test points in the differential test, by selecting the "10 Second", 67 00:03:57,020 --> 00:04:01,010 the GPS, by considering the injection time of the device, 68 00:04:01,034 --> 00:04:12,355 starts to count sown in 10 s cycles and in case of existence of untested point, when the inverse counter reaches zero, the next point will be tested. 69 00:04:12,379 --> 00:04:17,390 Using this option, the start time for the "End to End" tests might not be the same. 70 00:04:17,421 --> 00:04:21,770 To solve this problem, you have to start the test using the "Start Time". 71 00:04:21,794 --> 00:04:27,474 remember that this time is the time that the device adjusts with the "GPS". 72 00:04:27,498 --> 00:04:33,400 remember that in this method, only the first point is tested and the rest won’t. 73 00:04:33,424 --> 00:04:34,671 For these kinds of tests, 74 00:04:34,695 --> 00:04:44,258 the "Next Full" and "Start Time" should be simultaneously checked so the first point would start with the "GPS" clock and the next points would run with the "Next Full" method. 75 00:04:44,282 --> 00:04:52,691 For example, if in the differential room and for "End to End" test you have got four test points and want to run the test at the same time with another point, 76 00:04:52,715 --> 00:04:59,198 you have to set the "Start Time" on a special time, for example, 17:47:30 and also, 77 00:04:59,222 --> 00:05:01,471 set the "Next Full" on 10 seconds. 78 00:05:01,495 --> 00:05:10,062 The first point is tested in the specified time and the next points are tested during the specified time period in the "Next Full". 79 00:05:10,086 --> 00:05:13,316 , you Also see that in the statusbar 80 00:05:13,340 --> 00:05:23,656 the test time of each point and the remaining time until the next intended test point will be displayed in the "Start" and "Left Time" sections, respectively. 81 00:05:23,680 --> 00:05:30,139 In the "Data" section, the data about the "GPS" time, test location, etc. are shown. 82 00:05:30,196 --> 00:05:35,957 In the "Data and Time GPS" field, the time and data received from "GPS" are displayed. 83 00:05:35,981 --> 00:05:42,378 In addition, after that the "Sync" ends, the tester time is recorded in the "Date and Time Tester" field. 84 00:05:42,402 --> 00:05:47,916 remember this time should be identical with the time recorded in the "Date and Time GPS". 85 00:05:47,940 --> 00:05:55,001 Also, the geographical width and length of the test location are displayed in "Latitude" and "Longitude" fields, 86 00:05:55,025 --> 00:06:01,769 respectively and added to the test report that using them, the exact location of the test could be found on the map. 87 00:06:01,793 --> 00:06:09,514 In addition, in this section, in the "Altitude" section, the "GPS" amplitude with respect to the base level are displayed. 88 00:06:09,538 --> 00:06:19,959 In the "Fix Mode", "PDOP" and "HDOP" fields, various models of the location, location precision and altitude precision are displayed. 89 00:06:19,983 --> 00:06:25,129 In the satellite field, the number of satellites used for settings are displayed. 90 00:06:25,153 --> 00:06:32,380 If the device receives the sent pulses from the “GPS”, in the "Time Pulse" field the word "Detected" is displayed. 91 00:06:32,404 --> 00:06:36,681 But if these signals are not received, the word "Not Detected" is displayed. 92 00:06:36,705 --> 00:06:45,762 In addition, in the "Satellite Signal Level" window, the signals receiving level from the "GPS" are displayed and in the "Satellite Signal Level History", 93 00:06:45,786 --> 00:06:50,961 the number of satellites and the signal strength related to various satellites are displayed. 94 00:06:50,985 --> 00:06:51,033 95 00:06:51,034 --> 00:06:51,082 " 96 00:06:51,083 --> 00:06:51,131 "R 97 00:06:51,132 --> 00:06:51,179 "Re 98 00:06:51,180 --> 00:06:51,228 "Rep 99 00:06:51,229 --> 00:06:51,277 "Repe 100 00:06:51,278 --> 00:06:51,326 "Repet 101 00:06:51,327 --> 00:06:51,375 "Repeti 102 00:06:51,376 --> 00:06:51,424 "Repetit 103 00:06:51,425 --> 00:06:51,472 "Repetiti 104 00:06:51,473 --> 00:06:51,521 "Repetitio 105 00:06:51,522 --> 00:06:51,570 "Repetition 106 00:06:51,571 --> 00:06:51,619 "Repetition" 107 00:06:51,620 --> 00:06:51,668 "Repetition": 108 00:06:51,669 --> 00:06:51,717 "Repetition": 109 00:06:51,718 --> 00:06:51,765 "Repetition": t 110 00:06:51,766 --> 00:06:51,814 "Repetition": ta 111 00:06:51,815 --> 00:06:51,863 "Repetition": tab 112 00:06:51,864 --> 00:06:52,264 "Repetition": tab 113 00:06:52,288 --> 00:06:58,782 Since this tab is active only in the "AMT Sequencer" room and inactive in other rooms, at first, 114 00:06:58,807 --> 00:07:06,610 the "AMT Sequencer" room opens and the descriptions related to this section are presented in the "Start Condition-Repetition" window. 115 00:07:06,634 --> 00:07:11,196 This tab is used for repeating a test for the desired number of times. 116 00:07:11,227 --> 00:07:19,672 The number of test repetitions is inserted in the "Number of Repetition" field that the test can be run for a maximum of 1000 times. 117 00:07:19,696 --> 00:07:24,686 For example, here, five is inserted so the test would be is repeated five times. 118 00:07:24,710 --> 00:07:29,740 Also, if the user wants to make a delay between each test repetition, 119 00:07:29,764 --> 00:07:34,229 he can enter this time as a delay in "Time between Repetitions". 120 00:07:34,261 --> 00:07:38,989 For example, here, 1 second is inserted and the test "RUN". 121 00:07:39,014 --> 00:07:44,860 You see that the intended test runs five times with the time intervals of 1 second.