1
00:00:23,402 --> 00:00:23,484
W

2
00:00:23,485 --> 00:00:23,567
Wr

3
00:00:23,568 --> 00:00:23,651
Wri

4
00:00:23,652 --> 00:00:23,734
Writ

5
00:00:23,735 --> 00:00:23,817
Writi

6
00:00:23,818 --> 00:00:23,900
Writin

7
00:00:23,901 --> 00:00:23,983
Writing

8
00:00:23,984 --> 00:00:24,066
Writing

9
00:00:24,067 --> 00:00:24,150
Writing f

10
00:00:24,151 --> 00:00:24,233
Writing fo

11
00:00:24,234 --> 00:00:24,316
Writing for

12
00:00:24,317 --> 00:00:24,399
Writing form

13
00:00:24,400 --> 00:00:24,482
Writing formu

14
00:00:24,483 --> 00:00:24,565
Writing formul

15
00:00:24,566 --> 00:00:24,649
Writing formula

16
00:00:24,650 --> 00:00:24,732
Writing formula

17
00:00:24,733 --> 00:00:24,815
Writing formula f

18
00:00:24,816 --> 00:00:24,898
Writing formula fo

19
00:00:24,899 --> 00:00:24,981
Writing formula for

20
00:00:24,982 --> 00:00:25,064
Writing formula for

21
00:00:25,065 --> 00:00:25,148
Writing formula for t

22
00:00:25,149 --> 00:00:25,231
Writing formula for th

23
00:00:25,232 --> 00:00:25,314
Writing formula for the

24
00:00:25,315 --> 00:00:25,397
Writing formula for the

25
00:00:25,398 --> 00:00:25,480
Writing formula for the “

26
00:00:25,481 --> 00:00:25,563
Writing formula for the “X

27
00:00:25,564 --> 00:00:25,647
Writing formula for the “XR

28
00:00:25,648 --> 00:00:25,730
Writing formula for the “XRi

29
00:00:25,731 --> 00:00:25,813
Writing formula for the “XRio

30
00:00:25,814 --> 00:00:25,896
Writing formula for the “XRio

31
00:00:25,897 --> 00:00:25,979
Writing formula for the “XRio C

32
00:00:25,980 --> 00:00:26,062
Writing formula for the “XRio Co

33
00:00:26,063 --> 00:00:26,146
Writing formula for the “XRio Con

34
00:00:26,147 --> 00:00:26,229
Writing formula for the “XRio Conv

35
00:00:26,230 --> 00:00:26,312
Writing formula for the “XRio Conve

36
00:00:26,313 --> 00:00:26,395
Writing formula for the “XRio Conver

37
00:00:26,396 --> 00:00:26,478
Writing formula for the “XRio Convert

38
00:00:26,479 --> 00:00:26,561
Writing formula for the “XRio Converte

39
00:00:26,562 --> 00:00:26,645
Writing formula for the “XRio Converter

40
00:00:26,646 --> 00:00:26,728
Writing formula for the “XRio Converter”

41
00:00:26,729 --> 00:00:26,812
Writing formula for the “XRio Converter”:

42
00:00:26,837 --> 00:00:35,702
So far, “Relay Parameter Section” and “Additional Information” for an Overcurrent function have been explained simply and briefly; also we have completely covered the structure of “XRio Converter” menu.

43
00:00:35,924 --> 00:00:40,584
Now we should talk about determining whether these blocks and parameters are enabled.

44
00:00:40,609 --> 00:00:40,694
E

45
00:00:40,695 --> 00:00:40,779
En

46
00:00:40,780 --> 00:00:40,865
Ena

47
00:00:40,866 --> 00:00:40,951
Enab

48
00:00:40,952 --> 00:00:41,036
Enabl

49
00:00:41,037 --> 00:00:41,122
Enabli

50
00:00:41,123 --> 00:00:41,208
Enablin

51
00:00:41,209 --> 00:00:41,293
Enabling

52
00:00:41,294 --> 00:00:41,379
Enabling

53
00:00:41,380 --> 00:00:41,465
Enabling a

54
00:00:41,466 --> 00:00:41,550
Enabling an

55
00:00:41,551 --> 00:00:41,636
Enabling and

56
00:00:41,637 --> 00:00:41,722
Enabling and

57
00:00:41,723 --> 00:00:41,807
Enabling and d

58
00:00:41,808 --> 00:00:41,893
Enabling and di

59
00:00:41,894 --> 00:00:41,979
Enabling and dis

60
00:00:41,980 --> 00:00:42,064
Enabling and disa

61
00:00:42,065 --> 00:00:42,150
Enabling and disab

62
00:00:42,151 --> 00:00:42,236
Enabling and disabl

63
00:00:42,237 --> 00:00:42,321
Enabling and disabli

64
00:00:42,322 --> 00:00:42,407
Enabling and disablin

65
00:00:42,408 --> 00:00:42,493
Enabling and disabling

66
00:00:42,494 --> 00:00:42,578
Enabling and disabling

67
00:00:42,579 --> 00:00:42,664
Enabling and disabling b

68
00:00:42,665 --> 00:00:42,750
Enabling and disabling bl

69
00:00:42,751 --> 00:00:42,835
Enabling and disabling blo

70
00:00:42,836 --> 00:00:42,921
Enabling and disabling bloc

71
00:00:42,922 --> 00:00:43,007
Enabling and disabling block

72
00:00:43,008 --> 00:00:43,092
Enabling and disabling blocks

73
00:00:43,093 --> 00:00:43,179
Enabling and disabling blocks:

74
00:00:43,204 --> 00:00:47,982
“50/51” block is located under subcategory of “Setting Group”.

75
00:00:48,007 --> 00:01:01,351
To associate the enabling of “50/51” block to the parameter measure of “50/51” in the “Device Config” block, double-click on “50/51” block and select “Formula” in “Enabled” section.

76
00:01:01,376 --> 00:01:06,766
Then, click on “…” icon to open “XRio Formula Editor” window.

77
00:01:06,791 --> 00:01:14,637
The parameter with which the enabling of “50/51” block is associated should be entered in “References” section.

78
00:01:14,662 --> 00:01:20,693
To enter the intended parameter, click on “+” to open “Add Ref.Param” window.

79
00:01:20,718 --> 00:01:29,131
From the box at the top of the page, select “50/51” parameter from the tree diagram of “XRio Converter” file in the “Device Config” block.

80
00:01:29,156 --> 00:01:37,726
After selecting this parameter, by clicking on “Add RefParam”, “50/51” parameter is added to the “References” in the “Ref.Params” section.

81
00:01:37,751 --> 00:01:43,140
“Enumerations” of this parameter are listed at the bottom of the page in form of a tree diagram.

82
00:01:43,165 --> 00:01:50,294
. Select your intended “Enumeration” and click on “Add RefEnum” to add the enumeration to “Ref. Enums” section.

83
00:01:50,319 --> 00:02:01,224
. “Enumeration=Disabled” with “ID=TXT_1_101” is selected here. After closing this window, you can view the path to each parameter in the “Path” column.

84
00:02:01,249 --> 00:02:04,600
Paths are displayed by using the “ID” of each block.

85
00:02:04,625 --> 00:02:13,543
For example, “50/51” parameter with “ID=OC_101” is located along the path of “CUSTOM”, “SETTING” and “ID” blocks.

86
00:02:13,568 --> 00:02:17,511
Also, for writing the formula, “ID” of these parameters is used.

87
00:02:17,536 --> 00:02:28,290
At the right box, it is specified that if there is a parameter with “ID=OC_101” and “Enumeration=Disabled”, “50/51” block should be enabled.

88
00:02:28,315 --> 00:02:36,257
This formula is written as “NOT OC_101=TXT_1_101”.

89
00:02:36,282 --> 00:02:44,098
After clicking on “Test”, if a message saying “Test was successful” is displayed, the formula is correct and there is no problem.

90
00:02:44,123 --> 00:02:47,018
. If a tiny change is made to the formula,

91
00:02:47,043 --> 00:02:57,178
for example the “ID” is changed, by clicking on “Test” a message saying that there is no parameter with “ID=TXT_2_101” will be displayed.

92
00:02:57,203 --> 00:03:06,373
Then, by clicking on “OK” two more messages will be displayed saying that the displayed formula is not correct and the last message says “Test was not successful”.

93
00:03:06,398 --> 00:03:14,038
By correcting the formula and closing the “XRio Formula Editor” window, you can see that the status of the block is “False” and this block,

94
00:03:14,063 --> 00:03:17,225
, displayed with an “X” sign, is disabled.

95
00:03:17,250 --> 00:03:26,979
If the measure of “50/51” parameter is changed in the “Device Config” block, (Value=Definite Time), the “50/51” block is enabled and the “X” mark is removed.

96
00:03:27,004 --> 00:03:33,293
Likewise, it is possible to associate enabling or disabling of other blocks with one or several parameters.

97
00:03:33,318 --> 00:03:37,291
Like the previous situation, a formula should be written for “50” block.

98
00:03:37,316 --> 00:03:46,503
By repeating the previous stages and selecting “50/51” parameter and “Enumeration=Disabled” with “ID=TXT_1_101”,

99
00:03:46,528 --> 00:03:51,830
a formula should be written for the activeness of this parameter on the “XRio Formula Editor”.

100
00:03:51,855 --> 00:04:04,405
This formula is written as “NOT OC_101=TXT_1_101”. So, whenever “50/51” block is enable, this block should be enable as well.

101
00:04:04,430 --> 00:04:10,699
Click on “Test” to validate the written formula and in the end click on “OK”.

102
00:04:11,367 --> 00:04:16,458
For enabling of “51” block, double-click on it and select “Formula”.

103
00:04:16,483 --> 00:04:24,759
After opening the “Add Ref.Param” window, select “50/51 parameter and “Enumerations” of “Disabled” and “Definite Time”.

104
00:04:24,784 --> 00:04:31,267
In fact, “51” block is enabled when “Enumerations” of “Disabled” and “Definite Time” are not selected.

105
00:04:31,292 --> 00:04:44,400
Then, the formula is written as “NOT OC_101=TXT_1_101_ AND NOT OC_101=TXT_2_101”.

106
00:04:44,425 --> 00:04:48,995
Click on “Test” to validate the formula and finally click on “OK”.

107
00:04:49,020 --> 00:05:00,419
If “Definite Time” is selected as the value of “50/51” parameter in the “Device Config” block, “50/51” and “50” blocks are enabled while “51” block is disabled.

108
00:05:00,444 --> 00:05:07,188
If “Time Overcurrent” is selected as the value of “50/51” parameter, all three blocks are enabled.

109
00:05:07,213 --> 00:05:07,283
E

110
00:05:07,284 --> 00:05:07,354
En

111
00:05:07,355 --> 00:05:07,425
Ena

112
00:05:07,426 --> 00:05:07,497
Enab

113
00:05:07,498 --> 00:05:07,568
Enabl

114
00:05:07,569 --> 00:05:07,639
Enabli

115
00:05:07,640 --> 00:05:07,710
Enablin

116
00:05:07,711 --> 00:05:07,781
Enabling

117
00:05:07,782 --> 00:05:07,852
Enabling

118
00:05:07,853 --> 00:05:07,923
Enabling a

119
00:05:07,924 --> 00:05:07,995
Enabling an

120
00:05:07,996 --> 00:05:08,066
Enabling and

121
00:05:08,067 --> 00:05:08,137
Enabling and

122
00:05:08,138 --> 00:05:08,208
Enabling and d

123
00:05:08,209 --> 00:05:08,279
Enabling and di

124
00:05:08,280 --> 00:05:08,350
Enabling and dis

125
00:05:08,351 --> 00:05:08,422
Enabling and disa

126
00:05:08,423 --> 00:05:08,493
Enabling and disab

127
00:05:08,494 --> 00:05:08,564
Enabling and disabl

128
00:05:08,565 --> 00:05:08,635
Enabling and disabli

129
00:05:08,636 --> 00:05:08,706
Enabling and disablin

130
00:05:08,707 --> 00:05:08,777
Enabling and disabling

131
00:05:08,778 --> 00:05:08,848
Enabling and disabling

132
00:05:08,849 --> 00:05:08,920
Enabling and disabling p

133
00:05:08,921 --> 00:05:08,991
Enabling and disabling pa

134
00:05:08,992 --> 00:05:09,062
Enabling and disabling par

135
00:05:09,063 --> 00:05:09,133
Enabling and disabling para

136
00:05:09,134 --> 00:05:09,204
Enabling and disabling param

137
00:05:09,205 --> 00:05:09,275
Enabling and disabling parame

138
00:05:09,276 --> 00:05:09,346
Enabling and disabling paramet

139
00:05:09,347 --> 00:05:09,418
Enabling and disabling paramete

140
00:05:09,419 --> 00:05:09,489
Enabling and disabling parameter

141
00:05:09,490 --> 00:05:09,560
Enabling and disabling parameters

142
00:05:09,561 --> 00:05:09,632
Enabling and disabling parameters:

143
00:05:09,657 --> 00:05:14,553
In each block, it is possible to associate Enabling of parameters with another parameter.

144
00:05:14,578 --> 00:05:23,000
For example, in “51” block, “IEC Curve” parameter is enable when “Time Overcurrent” is selected as the value of “50/51” parameter.

145
00:05:23,025 --> 00:05:28,141
To do this, double-click on “State” column and select “Formula” from the “Enabled” section.

146
00:05:28,166 --> 00:05:34,022
By clicking on “…”icon in the “XRio Formula Editor” window like the previous example,

147
00:05:34,047 --> 00:05:46,461
, in the “Add Ref.Param” window “50/51” parameter and “Enumeration=Time Overcurrent” with “ID=TXT_3_101” are selected and added to the “References” section.

148
00:05:46,486 --> 00:05:59,754
The formula is written as “OC_101=TXT_3_101” at the right side and by clicking on “Test” the validity of the formula is examined and the “OK” is selected.

149
00:05:59,779 --> 00:06:05,995
If in “Device Config” block, “Time Overcurrent” is selected as the value of “50/51” parameter,

150
00:06:06,020 --> 00:06:13,085
“IEC Curve” parameter is enabled while if “Definite Time” is selected, “IEC Curve” parameter is disabled.