1
00:00:23,232 --> 00:00:27,785
Durch Klicken auf „Test Object“ können Sie die Seite „General Test Object“ öffnen.

2
00:00:27,810 --> 00:00:35,069
On this page, the settings related to “Object” or the device being tested are adjusted. In fact, this object can be a relay

3
00:00:35,101 --> 00:00:39,128
To enter the information of the relay on this page there are several ways

4
00:00:39,153 --> 00:00:45,525
In the first case, the user reads all the information of the relay from the catalog and enters the information manually

5
00:00:45,550 --> 00:00:53,104
For example, to enter the nominal Specifications of the relay, you can double-click on “Device” in the “Service Setting” page

6
00:00:53,129 --> 00:01:00,277
in the “Nominal Values” section and enter frequency and nominal voltage of the PTs as well as the nominal current of the CTs

7
00:01:00,309 --> 00:01:06,276
Also, it is possible to enter information such as device name, serial number etc

8
00:01:06,301 --> 00:01:11,591
in the “Device” section. After that, to save the information, it is necessary to click on “OK”

9
00:01:11,616 --> 00:01:15,810
It should be noted that whatever is in the "Device" block on the "Device Setting" page

10
00:01:15,835 --> 00:01:20,810
also exists in the "Device" block Tree diagram and the values can be entered here too

11
00:01:20,835 --> 00:01:27,727
For example, there is a series of information about nominal values of the device, “Substation”, “Bay”,

12
00:01:27,752 --> 00:01:34,051
“Nominal Values”, etc. You can also find this information in the branches of “Device” Tree diagram

13
00:01:34,076 --> 00:01:40,806
This means that in the “Name plate” section, you can also find information about device’s ID or in the “Nominal Values”

14
00:01:40,831 --> 00:01:44,658
section, you can find information about the nominal values of the relay

15
00:01:44,683 --> 00:01:48,526
If “Vebko” is entered in the “Value” field, in the “Device Name”

16
00:01:48,551 --> 00:01:55,051
row in the “Name Plate” section, by opening the “Device” page, this word is also recorded in the intended section

17
00:01:55,428 --> 00:02:00,086
In fact, these two sections are linked and enter changes simultaneously

18
00:02:00,111 --> 00:02:03,219
After entering the nominal values of the relays manually,

19
00:02:03,251 --> 00:02:08,212
it is, also, necessary to manually enter the specifications of the protective function

20
00:02:08,237 --> 00:02:12,272
For example, to enter the specifications of the “Distance” protective function,

21
00:02:12,297 --> 00:02:16,164
you can enter the related information such as tolerances,

22
00:02:16,197 --> 00:02:22,790
length and angle of the line by clicking on “Distance” block in the “Distance Protective Parameters” page

23
00:02:22,815 --> 00:02:28,870
You can also draw the relay zones according to the catalog under the “Zone Setting” on this page

24
00:02:30,423 --> 00:02:36,925
To do this, click on “New” to open a new row and then click on “Edit” and in the opened page

25
00:02:37,809 --> 00:02:42,553
enter the zone information according to the relay catalog and then click on “OK”

26
00:02:42,578 --> 00:02:45,291
After that you can see that the zone is drawn.

27
00:02:45,316 --> 00:02:51,050
By opening the “Distance” block, the entered information can be seen in the form of a tree diagram

28
00:02:51,487 --> 00:02:55,728
For example, the information related to “Zone” is displayed in this section too

29
00:02:55,753 --> 00:02:58,610
You should note that these sections are linked

30
00:02:58,635 --> 00:03:02,597
To enter information of functions such as “Differential”

31
00:03:02,622 --> 00:03:07,051
and “Over Current” you can click on the related block and enter the information

32
00:03:07,076 --> 00:03:15,203
After entering the relay information manually, by clicking on “OK”, you can import the settings to the software and continue the test

33
00:03:15,228 --> 00:03:22,802
You can enter a value in the upper right corner of the “Value” feed and the software displays the parameters that have this value

34
00:03:22,827 --> 00:03:27,952
You can also search for your intended word, by entering it in the “Tree” section

35
00:03:27,977 --> 00:03:31,338
For example, by entering “132” in “Value”,

36
00:03:31,363 --> 00:03:36,374
the parameters that have this value are displayed and if the word “Distance” is entered,

37
00:03:36,406 --> 00:03:40,470
this block and its subcategories are displayed in a highlighted mode

38
00:03:40,495 --> 00:03:44,788
There are two options of “OK” and “Cancel” on the bottom of the page

39
00:03:44,813 --> 00:03:50,209
“OK” is used to enter the information and “Cancel” is used to cancel entering the information

40
00:03:50,234 --> 00:03:53,245
If you check “Show/Hide” option on the bottom,

41
00:03:53,270 --> 00:03:59,752
you can change the status of the lower window to hidden or visible which will be fully explained in future videos

42
00:03:59,777 --> 00:04:05,240
The important point is that some of the relays provide the user with the settings as a “Rio” file.

43
00:04:05,265 --> 00:04:06,728
By directly loading,

44
00:04:06,753 --> 00:04:13,428
all the settings of the relay are entered to the software automatically and there is no need for manual insertion of the information