1
00:00:23,994 --> 00:00:26,236
Default Setting for “Report”

2
00:00:26,316 --> 00:00:28,736
In the “Room” tab and in the “Report” section,

3
00:00:28,761 --> 00:00:36,043
the time of updating the reports in the rooms, if any changes happen, it indicates in the “Report Refresh Interval” field.

4
00:00:36,068 --> 00:00:42,472
For example, the test information is checked every five seconds and if there is any change the report is updated.

5
00:00:42,497 --> 00:00:47,954
In this section, by clicking on the “Setting” button a new window named “Report Setting” is opened.

6
00:00:47,979 --> 00:00:54,327
In “Item Type” the default settings can be specified to get the report from a specific room or screen.

7
00:00:54,352 --> 00:01:01,848
The elements that can be added to the report by the user are located in the “Report Setting” section of this window.

8
00:01:01,872 --> 00:01:07,101
By checking the main option, the user can add all the subsets to their output report.

9
00:01:07,125 --> 00:01:15,825
If the user chooses only some of the subsets of the main option, the square sign next to the main option will be displayed as a half-filled square.

10
00:01:15,849 --> 00:01:23,458
In the column next to the "Report Setting" section, the user can select HTML or PDF as the format of the report preview.

11
00:01:23,482 --> 00:01:30,743
By clicking on the "Advance" button, the screen is displayed more extensively, and more settings can be applied to the report.

12
00:01:30,794 --> 00:01:37,227
By checking each of these categories, their subcategory is opened and the needed settings can be applied.

13
00:01:37,251 --> 00:01:43,506
At the top of this screen, there are options used for saving the applied settings and using them again later.

14
00:01:43,530 --> 00:01:52,902
For instance, if “Sequencer” is selected in the “Item Type” and some specific settings are set at default and confirmed, after entering the “Sequencer” room,

15
00:01:52,926 --> 00:02:00,963
selecting the “Report View” option from “View” menu and reviewing the “Report Setting” section and then selecting “Load from Template” option,

16
00:02:00,987 --> 00:02:06,461
you will see that the same settings are set at default for this section as well.

17
00:02:06,485 --> 00:02:16,087
In the "Extra Tools" section, the user is allowed to click on the "Report Generator" button and get a report on the saved test files without needing to open them.

18
00:02:16,111 --> 00:02:20,934
After clicking on this button, a screen called "PDF Report Creator" opens.

19
00:02:20,958 --> 00:02:28,125
On this screen, the user can select their test files to get a report on by clicking on the “Select Input Files” button.

20
00:02:28,149 --> 00:02:30,857
For example, the first two files are selected.

21
00:02:30,881 --> 00:02:37,490
The user can, also, by clicking on the “Select Input Folders”, select a folder including several test files.

22
00:02:37,514 --> 00:02:43,629
and insert them into the “Files” section. For example, “Vebko Test Files” folder is selected.

23
00:02:43,653 --> 00:02:49,981
By clicking on the “Clear” button, the files inserted for getting a report can be removed from the list.

24
00:02:50,006 --> 00:02:59,688
By selecting the “Open Folder after Creating PDF” option in the “Other Setting” section, the folder where the file is saved will be displayed right after the report is made.

25
00:02:59,712 --> 00:03:09,365
In the “Output” section, by selecting the “Save Report in File Directory” option, the report files can be saved at the same directory as where the files are imported from.

26
00:03:09,389 --> 00:03:18,169
If the “Save all Report to Selected Directory” option is selected, the user can select a specific directory and save all their reports in that directory.

27
00:03:18,194 --> 00:03:21,902
There are two options available in the “Overwrite File” section.

28
00:03:21,926 --> 00:03:27,655
In order to clarify this issue with an example, a file is imported for getting a report.

29
00:03:27,679 --> 00:03:36,226
By selecting the “Bypass Existing PDFs” option, if they’re already exists a report on a file in the selected directory,

30
00:03:36,250 --> 00:03:39,507
the software does not make another report on that file.

31
00:03:39,531 --> 00:03:47,285
The appearance of this screen is due to the prior selection of the “Open Folder after Creating PDF” option which can be disabled.

32
00:03:47,309 --> 00:03:52,777
By selecting the “Overwrite Existing PDFs”, the new report replaces the previous one.

33
00:03:52,801 --> 00:03:58,113
In the “Report Setting” section, by selecting the “Load Report Setting from File” option,

34
00:03:58,137 --> 00:04:03,978
it is specified that for making the reports, the setting from the loaded files should be used.

35
00:04:04,002 --> 00:04:12,647
By selecting the “Load Report Setting From Template” option, the settings which are saved in the Template file will be used for making the reports.

36
00:04:12,671 --> 00:04:17,732
In the “Device Setting” section, by selecting the “Load Device Setting from File” option,

37
00:04:17,756 --> 00:04:24,633
it is specified that for making the reports, the Device setting from the loaded files will be used, while in the same section,

38
00:04:24,657 --> 00:04:32,478
by selecting the “Load Device Setting from Template” option the settings which are saved in the Template file will be used for making the reports.

39
00:04:32,502 --> 00:04:39,094
By selecting the “Include Test Object Active Test” option in the “Report Setting of Instrument” section,

40
00:04:39,118 --> 00:04:49,319
if a report is made on the Instrument test files, the information existing in the “Test Object” tab will be included in the report under any circumstances.

41
00:04:49,358 --> 00:05:00,187
By selecting “Include Last Active Test” option, the previously saved equipment test files and the last performed test which has not been “Cleared” by the user,

42
00:05:00,211 --> 00:05:10,547
by selecting “Add To Report” radio-button the report of that test is added to the report as well but if the user has added the test result to the output report,

43
00:05:10,571 --> 00:05:17,796
by selecting “Bypass When Added To Report” radio-button, the software does not add the test result to the output report again.

44
00:05:17,820 --> 00:05:23,699
By clicking on the “Remove Signature” button in the “Extra Tools” section on the “Preferences” screen,

45
00:05:23,723 --> 00:05:33,095
a new screen named “Remove Signature from Report” appears in which the user can remove the existing signatures from the reports on their desired files.

46
00:05:33,119 --> 00:05:40,319
On this screen, by clicking on the “Select Input Files” button, the user selects their files for removing the signature.

47
00:05:40,343 --> 00:05:49,932
By clicking on the “Select Input Folder” button, the user can select a folder containing several report files and import all of these files into this list altogether.

48
00:05:49,956 --> 00:05:53,000
After the report files have been added to the list,

49
00:05:53,024 --> 00:06:02,752
by clicking on the “Modify” button, the existing signatures in the report will be deleted along with the framework around the report as well as the added names to the signature.