1
00:00:26,024 --> 00:00:31,151
Before resetting the device’s IP address, it is necessary to make sure that the device is turned off

2
00:00:31,230 --> 00:00:36,755
Then, the RS232 dongle is connected to its specific port on the back of the device

3
00:00:36,780 --> 00:00:42,111
Upon turning on the device, you can see that, the error lights of the device will start blinking

4
00:00:50,254 --> 00:00:55,695
After blinking several times, there is a pause and then the device will start blinking again

5
00:01:09,704 --> 00:01:13,130
After this process is repeated for the third time,

6
00:01:13,442 --> 00:01:19,379
the user should turn off the device and disconnect the RS232 dongle from the back of the device

7
00:01:21,005 --> 00:01:28,129
Now, the IP address of the device is reset and its serial for connecting via Wi-Fi is changed to 199

8
00:01:28,496 --> 00:01:33,378
After turning on the device, to establish the connection between the device and the laptop,

9
00:01:33,415 --> 00:01:38,330
 enter “199” in the fourth part of the IP field on the “Preferences” page